The work
Heavy gearbox work for Fort Worth plants
Fort Worth's industrial base leans heavy — food processing, oilfield equipment, aggregate and building materials, rail-served manufacturing, and the plants strung along I-35W and I-20. The gearboxes in that world drive mixers, kilns, conveyors, and crushers, and they tend to be big, old, and long out of the OEM's catalog. That's exactly where a machine-shop rebuild earns its keep: the housing and gear set are usually sound, and what failed — bearings, seals, a scored journal, a worn bore — is machining work, not a new gearbox.
Every rebuild follows the same discipline: complete teardown and cleaning, everything measured, then bearings, seals, and shims replaced with backlash set to spec. Worn journals come back to size through shaft rebuilding; damaged gears are replaced with gears machined in-house from the originals; cracked housing corners and damaged mounting faces are repaired and re-machined. Units up to about 4,000 lb fit the shop, and the inspection report always lands before the rebuild does.
What a rebuild covers
- Complete teardown, cleaning, and measurement
- Bearings, seals, and shims replaced; backlash set to spec
- Replacement gears machined from the originals
- Shaft journals and gear bores restored to size
- Housings repaired — cracked corners, mounting faces
- Pickup and delivery across Fort Worth & Tarrant County
How it works
Opened, measured, rebuilt, returned
The process doesn't change with the size of the box — and a down drive gets priority at every step.
Email photos & the nameplate
Photos, the nameplate, rough size and weight, and the symptom — sent to lambdamachineworks@gmail.com.
Teardown & inspection report
Picked up from your Fort Worth facility, opened, and measured. You see the report and the firm quote before approving anything.
Machining & rebuild
Gears, shafts, and bores machined in-house; new bearings and seals fitted; backlash set to spec on the bench.
Delivered back across DFW
The rebuilt unit returns with the worn parts, ready to go back on its foundation and back to work.
Gearbox repair in Fort Worth — common questions
Can a gear with broken or worn teeth be replaced?
In most cases, yes. Replacement gears are machined in-house from the original gear's measurements, and the mating shaft or bore is restored at the same time so the set runs together correctly. If the damage has spread to the housing, the inspection report will lay out the options honestly.
Do you handle large, heavy gearboxes?
The shop handles parts up to about 4,000 lb, which covers most plant gearboxes and reducers. Email photos and the unit's approximate size and weight to lambdamachineworks@gmail.com, and the shop will confirm it fits before pickup is arranged.
What do you need from us to quote a rebuild?
Start with photos of the gearbox and its nameplate by email. The firm quote comes after teardown and measurement — that's the only honest way to price a rebuild, and the inspection report comes before any work or charge for machining.
A drive is down in Fort Worth — how quickly can you look at it?
Breakdown work gets priority scheduling. Email lambdamachineworks@gmail.com with photos and a note that the equipment is down, and you'll get a straight answer on timing the same day.
East side of the metroplex? See gearbox repair in Dallas. For the full service overview, see gearbox repair & rebuilding. Line down anywhere in DFW? See emergency industrial repair.
Get a Fort Worth gearbox repair quote
Email a photo of the unit and tell us what it's doing — noise, leak, or locked up. We'll give you a straight answer on rebuilding it, and what it will cost.