Lambda Machine Works Machining · Industrial Repair

Industrial repair & machining work

Rebuilt multi-stage pump bowl assembly, freshly coated, mounted on a blue shipping skid
Pump Repair

Pump bowl assembly, rebuilt

Multi-stage bowl assembly rebuilt and coated, mounted on its skid and ready to go back down the hole. New wear parts inside, every fit checked on the bench.

Scope
Bowl rebuild, wear parts, protective coating
Result
Shipped back to site on its skid
Pump shaft with impeller mounted, resting on wooden blocks in the shop after machining
Shaft Rebuilding

Impeller & shaft assembly

A pump shaft with its impeller, resting on blocks after machining — journals and fits finished, ready to go back into the pump it came out of.

Scope
Shaft machining, impeller fit-up
Result
Assembled and ready for the pump
Machinist fitting a machined bearing housing into a large pump casing by hand
Pump Repair

Bearing housing fit-up

A machined bearing housing being fitted into a large pump casing — the kind of close work that decides whether a rebuild runs quiet for years or comes back in months.

Scope
Housing machining, hand fit & inspection
Result
Casing ready for assembly
Two machinists boring a large pump casing on a horizontal boring mill
Pump Repair

Large casing on the boring mill

A big casing set up on the horizontal boring mill, cut being watched by two machinists. Oversize work like this is where experience earns its keep.

Scope
Boring mill setup, bore restoration
Result
Bores back on size and on center
Large cylindrical steel housing fixtured on a horizontal boring mill, drill spindle alongside
CNC Machining

Large housing on the boring mill

A big cylindrical housing set up and fixtured on the horizontal boring mill — bores and bolt-hole patterns machined in a single setup, so everything stays on center and concentric.

Scope
Boring mill setup, boring & drilling
Result
Machined true in one setup
Tall polished cylindrical part standing on a boring mill table, being machined under coolant
CNC Machining

Tall cylinder, machined under coolant

A tall cylindrical part standing on the boring mill table, coolant running as the spindle works — oversize, one-off components like this don't come out of a catalog; they get made.

Scope
Boring mill machining, coolant-fed cutting
Result
Finished to print, ready for service
Large precision-machined steel plate with drilled and tapped hole patterns on a machine table
CNC Machining

Large drilled & milled plate

A large steel plate fresh off the machine — pockets milled and hole patterns drilled and tapped to print, every location laid out and verified before it left the table.

Scope
Milling, drilling & tapping to print
Result
Delivered ready to assemble
Bronze bushings and threaded sleeves in various stages of machining on a mill table
CNC Machining

Bronze bushings & threaded sleeves

Bronze bushings and threaded sleeves at different stages on the mill table — the wear parts pumps and gearboxes eat through, machined to the fits the equipment was built with.

Scope
Turning, boring, external threading
Result
Drop-in wear parts, made in-house
Machinist inspecting a large gear hobbing cutter mounted on a machine spindle
CNC Machining

Gear cutting setup

A gear hob mounted on the spindle, drawing in hand — the setup checked before the first tooth is cut. Gears for drives that OEMs no longer support start like this.

Scope
Gear hobbing setup & inspection
Result
Replacement gearing cut to spec
Steel cone being finish-turned on a lathe, held against a live center
CNC Machining

Taper turning on the lathe

A steel cone finish-turned between centers — tapers, transitions, and one-off profiles are everyday work on the lathe, measured as they come off the tool.

Scope
Lathe turning, taper & profile work
Result
Finished to print in a single setup
Split-case pump opened on a workbench during a rebuild
Pump Repair

Split-case pump rebuild

A workhorse process pump in with worn wear rings, a scored shaft, and bearings long past their life. Rebuilt with restored clearances and a shaft brought back to dimension.

Scope
Teardown, shaft rebuild, seals & bearings
Result
Back in service at a fraction of replacement cost
Gearbox gears, shafts, and bearing laid out on a bench mid-rebuild
Gearbox Repair

Gearbox overhaul

Noisy drive gearbox opened up to find a failed bearing and a worn input shaft. Journals machined back, new bearings and seals fitted, backlash set — quiet again.

Scope
Shaft machining, bearings, seals, backlash setup
Result
Returned to service without an OEM exchange unit
Lathe tool finishing a groove on a steel shaft
Shaft Rebuilding

Bearing journal restoration

A spun bearing leaves a journal undersize and out of round. We build the surface back up and finish it between centers, so a standard bearing presses on like it's a new shaft.

Scope
Build-up, turning, seal-surface restoration
Result
Original shaft saved; no waiting on a replacement
Lathe drilling into a large threaded steel flange, coolant spraying
CNC Machining

Replacement flanges & threaded parts

When a threaded component is obsolete or the OEM quote is hard to swallow, we machine replacements from the sample — threads, faces, and bolt patterns matched to the original.

Scope
Turning, threading, drilling from sample
Result
Drop-in replacement, made locally
CNC mill cutting a complex contoured aluminum component
CNC Machining

Custom milled components

Brackets, housings, plates, and one-off parts milled to print in aluminum and steel — the odd-shaped component your equipment needs and no catalog carries.

Scope
CNC milling to drawing or CAD
Result
Prototypes and short runs, inspected before delivery
Machinist hand-feeding a manual lathe cutting a steel workpiece
CNC Machining

One-off & rush turning

Some jobs are a single bushing at 7 a.m. because a line is waiting. Manual lathe work for bushings, pins, spacers, and repairs that can't wait for a production slot.

Scope
Manual turning, bushings, pins, spacers
Result
Same-week turnaround on urgent one-offs
Arc welding a steel plate with bright blue arc and sparks
Welding & Fabrication

Build-up & crack repair

Weld build-up puts metal back where wear took it away — then machining takes it to final size. Cracked brackets and housings get the same treatment: weld, machine, return.

Scope
Build-up welding, crack repair, finish machining
Result
Worn components restored instead of scrapped
Stacks of polished bronze pump impellers on the shop floor
Pump Repair

Bronze pump impellers

Stacks of bronze pump impellers, precision-machined and ready for assembly — the wear parts at the heart of the pumps we rebuild.

Scope
Impeller machining, batch production
Result
Ready to go into rebuilt pumps
Row of CNC turning centers in the shop, cast components stacked in the foreground
CNC Machining

CNC turning centers at work

CNC turning centers running production on cast components, with castings staged on the floor ready for the next setups.

Scope
CNC turning, production runs on castings
Result
Cast components machined to print
Display case of bronze pump components — impellers, bushings, shafts and wear parts
Pump Repair

Bronze pump components

A display of bronze pump components — impellers, bushings, shafts and wear parts, the pieces a pump rebuild is built from.

Scope
Impellers, bushings, shafts & wear parts
Result
Machined in-house, ready to fit
Two precision-turned steel shafts lying side by side on a concrete floor
Shaft Rebuilding

Precision-turned steel shafts

Two precision-turned steel shafts, journals and steps finished bright — the kind of shaft work pumps and gearboxes depend on.

Scope
Lathe turning, stepped journals & fits
Result
Finished shafts, ready for assembly
Long steel shaft mounted between centers on a lathe, mid-turn
Shaft Rebuilding

Shaft turning on the lathe

A shaft being turned on the lathe — holding tight tolerances on the journals and fits that decide how the finished machine runs.

Scope
Turning between centers, tolerance work
Result
Journals held to spec

From the shop floor

Big ring, turning true

Nine seconds of the lathe doing what it does best — a large steel ring spinning on the machine, its face coming up bright and true. This is the everyday work behind the photos above: heavy parts, held tight and cut to size.

Press play to watch it run.

Turning a large steel ring on the lathe

Your job could be next on the bench. Send a photo of the part or the print, and we'll tell you how we'd approach it — and what it should cost.

Get a Quote

Machine down? Part worn out?

Send us a photo of the part and tell us what it came off of. We'll tell you straight whether it can be rebuilt — and what it will cost.

Request a Quote ☎ Call (214) 662-7171